DJI Ronin 2 3-Axis Handheld Gimbal

DJI Ronin 2 3-Axis Handheld Gimbal

Share your photographs...

We would love to feature your photographs on our equipment pages to help inspire others. We respect your copyright. Sharing is easy, just send us a link to your image on social media or your own website and remember to tell us about the following:

Review this item...

Tell us how you would rate it overall:


There are no reviews for this item

The powerful DJI Ronin 2 3-Axis Handheld Gimbal is the next step in DJI's gimbal innovation. Featuring upgraded high-torque motors, a new detachable grip, and 'Enhanced Intelligence' the Ronin 2 has been engineered for reliability, efficiency, and ease of use. Compatible with more devices than ever before, the Ronin 2 can also resist high G-forces, ensuring unrivalled smoothness.
Key Features: DJI Ronin 2 3-Axis Handheld Gimbal
Unprecedented power: Upgraded high-torque motors allowing for more compatibility than ever before, ensuring smoothness even in high wind situations
Detachable grip: Remove the lower part of the hand grip when not needed
Simplicity: Refined and tweaked controls make setup easier than ever
'Enhanced Intelligence': Get shots that would never have been possible without more specialist equipment

DJI Ronin 2 Hands-on | Test Footage | The Best Gimbal Out There?

Operation modes:
Underslung mode
Upright mode
Briefcase mode
Handheld, car mount, aerial, tripod, & Steadicam mode
Built-in, independent IMU module
DJI Advanced 32-Bit ARM processor
DJI specialised gimbal drive motors with encoders
Dual battery system
Bluetooth module
D-Bus receiver support
2.4/5.8GHz receiver
Temperature sensors
Built-in touch panel
Built-in GPS
USB type-C connection
Power and video signal through slip ring
Included in your purchase:
Ronin 2 Gimbal
Carrying case
Ronin 2 Power hub
Camera mounting plate
Camera upper mounting plate
Remote controller
Battey compartment
Intelligent battery (TB50)
Battery charger
Power cable
Charging hub
Accessories package:
Screw and hex keys
Cable package:
Red power
Arri power
2-pin power
DC power
6-pin-to-P-tap adapter
USB-C cable
Control cable (red)
Control cable (Arri)
Ronin 2 power cable
S-bus receiver cable
Manual package
Monitor mount bracket
15 mm rod mount
15 mm extension rod
Ronin 2 universal mount

Camera tray dimensions:
Maximum depth from centre of gravity on camera base plate: 245mm
Maximum height measures from top of the camera base plate: 165mm
Maximum width: 180mm
Accessory power connections:
14.4V x 4 camera cage (combined 8 A)
12.6V x 2 pan motor (combined 4 A)
12.6V x 1 P-Tap (8 A)
GCU Power Unit: Intelligent Battery 4280mAh-22.8V
Connections: 2.4/5.8GHz remote control, Bluetooth 4.0, USB Type-C
Mechanical & Electrical Characteristics:

Working current:
Static current: 300mA (A22.8V)
Dynamic current: 500mA (@22.8V)
Locked motor current: Max 15A (@22.8V)
Run time: 8 hours (2.5 hours when powering gimbal and accessories)
Weight: 5.5kg (including handle bar) – 4.2kg (without handle bar)
Gimbal dimensions:
Including handle bar: 350 x 416 x 530mm
Excluding handle bar: 630 x 416 x 720mm
Working performance:

Load weight: 13.6 kg
Angular vibration range: 0.02°
Maximum controlled rotation speed:
Pan axis: 400°/s
Tilt axis: 360°/s
Roll axis: 360°/s
Mechanical endpoint range:
Pan axis control: 360° continuation rotation
Tilt axis control: +135°
Roll axis control: +220°
Controlled rotation range:
Pan axis control: 360° continuation rotation
Tilt axis control: +45° - 135°
Roll axis control: +45°

Attribute Value
Dimensions:350 x 416 x 530 mm
Accessory Power Connections:14.4 V x 4 Camera Cage (Combined 8 A), 12.6 V x 2 Pan Motor (Combined 4 A), 12.6 V x1 P-Tap (8 A)
Angular Vibration Range:± 0.02°
Controlled Rotation Range:Pan axis control: 360° continuous rotation / Tilt axis control: +45° to -135° / Roll axis control: ±45°
Input Power:Intelligent Battery: 4280 mAh-22.8 V
Load Weight:30 lbs (13.6 kg)
Maximum Controlled Rotation Speed:Pan axis: 400°/s, Tilt axis: 360°/s, Roll axis: 360°/s
Mobile Software Requirements:iOS 9 or above; Android 4.4 or above
Operating environment:-4°F ~ 122°F (-20°C ~ 50°C)
Operational Modes:Underslung Mode, Upright Mode, Briefcase Mode, Handheld, Car Mount, Aerial, Tripod, & Steadicam Mode
PC Software Requirements:Windows 7 or above; Mac OS X 10.11 or above
Supported Camera Dimensions:Maximum depth from the center of gravity on camera base plate: 245 mm, Maximum height measured from top of the camera base plate: 165 mm, Maximum width: 180 mm
Working Current:Static current: 300 mA (@22.8 V), Dynamic current: 500 mA (@22.8 V), Locked motor current: Max 15 A (@22.8 V)

Spanish sun...

Our absolute favourite find was the Museo Sorolla, a celebration of the life and work of Joaquin Sorolla (1863-1923). The museum was once the home of this influential painter.


Clash of the Cameras!

Clash of the Cameras

Looking for gift ideas for photography friends? These playing cards allow photo fans to play famous cameras off against each other in a classic top-trumps style card game.


Get 5% Off...

Sign up for our newsletters and get 5% off your first hire, our latest news, plus:

Get personalised offers to swap, sell and loan your gear for money.

Opportunities to try new equipment.